To open an AMSEC safe with a mechanical combination lock, follow these general steps:
- Turn the dial to the LEFT (counterclockwise), passing the first number of the combination three times and stop on it the fourth time at the opening index (top mark at 12 o'clock).
- Turn the dial to the RIGHT (clockwise), passing the second number twice and stop on it the third time at the opening index.
- Turn the dial to the LEFT again, stopping on the third number the second time at the opening index.
- Turn the dial slowly to the RIGHT until it stops, then turn the handle to open the door.
For safes with an optional key locking dial, set the combination lock to "0" and use the key to lock or unlock before dialing the combination. If the safe uses an electronic keypad (like the DL5000 model), press the "#" key, enter the user or administrator code, then turn the knob to open. Be careful to dial the numbers precisely without passing the correct number after you've stopped. Also, turning slowly and carefully helps. These instructions cover the common AMSEC mechanical lock operation. Specific models such as the CSC3018 or digital safes may differ slightly but follow the same general principle. If the combination is unknown and opening is not possible, contacting an AMSEC dealer or certified locksmith is recommended for authorized assistance or override options.
