To change the WiFi password on a Converge router, follow these general steps which apply to most Converge router brands like Huawei, FiberHome, ZTE, or Cisco:
-
Connect your device to the Converge router network.
-
Open a web browser and type the router IP address in the address bar. Common IP addresses are:
- 192.168.1.1 or 192.168.0.1 or 192.168.100.1 (check your router label for the specific IP).
-
Log in to the router's admin page using the default username and password. These are often:
- Username: admin
- Password: admin
(Or check the sticker on your router for the specific credentials.)
-
Once logged in, go to the Wireless or WLAN settings.
-
Find the field for WPA Pre-Shared Key or WPA Passphrase.
-
Enter your new WiFi password in this field.
-
Click Submit, Save, or Apply to save the changes.
-
Reconnect your devices to the WiFi using the new password.
Steps may vary slightly depending on the router brand (Huawei, ZTE, FiberHome, or Cisco). For example:
- Huawei routers: Go to WLAN > 2.4G / 5G Basic Network Settings to change the SSID and password.
- ZTE routers: Go to Network > Security to update the WPA Passphrase.
- Cisco routers: Go to Setup > Quick Setup and change the Pre-Shared Key.
Always ensure to note down the new password and reconnect all devices after changing it. If you cannot log in, reset your router to factory settings and try again.
