To clean your dishwasher filter, follow these steps:
- Remove the Bottom Rack
Pull out the bottom rack of your dishwasher to access the filter, which is usually located at the bottom of the dishwasher tub
- Locate and Remove the Filter
The filter often consists of two parts: an upper filter assembly and a lower filter. Twist the upper filter counterclockwise (usually a quarter turn) to unlock and lift it out. Then gently lift and pull the lower filter forward to remove it
- Rinse and Soak the Filter
Rinse the filter under warm running water to remove loose debris. For stubborn food particles or calcium deposits, soak the filter in warm water mixed with dishwashing liquid or a vinegar solution for about 30 minutes
- Scrub the Filter
Use a soft brush, old toothbrush, or sponge to gently scrub away any remaining residue. Avoid wire brushes or abrasive scrubbers to prevent damage to the filter mesh
- Clean the Filter Housing
Wipe down the area inside the dishwasher where the filter sits with a sponge or cloth dipped in warm soapy water to remove any trapped food or grease
- Reinstall the Filter
Place the lower filter back into the dishwasher, then insert the upper filter assembly. Twist the filter clockwise until it locks securely in place. Ensure the filter is properly seated and locked to avoid damage or poor dishwasher performance
- Run a Test Cycle (Optional)
After reinstalling, run a short cycle to confirm the filter is correctly installed and the dishwasher runs smoothly
Regular cleaning of your dishwasher filter (about once a month) helps maintain dishwasher efficiency and prevents odors or residue on dishes
. You will need:
- Warm water
- Dishwashing liquid (preferably with degreaser)
- Soft brush or old toothbrush
- Sponge or soft cloth
- Vinegar (optional for deep cleaning)
This process is generally similar across most dishwasher brands, but consult your dishwasher’s manual for model-specific instructions
