To clean a washing machine filter, follow these steps:
- Turn off and unplug the washing machine for safety.
- Locate the filter, usually at the bottom front of the machine behind a small access door or panel.
- Place a towel and a shallow container on the floor to catch any water that may spill when removing the filter.
- Open the filter access panel and slowly remove the drain hose cap (if present) to drain excess water into the container.
- Unscrew or pull out the filter from its housing. Water may also spill here, so be prepared.
- Rinse the filter under warm running water. Use a soft brush (like an old toothbrush) to scrub off any lint, debris, or buildup.
- Clean the inside of the filter housing with a damp cloth to remove any dirt left behind.
- Replace the filter by screwing or pushing it back into place securely.
- Close the access panel.
- Optionally, run a short wash cycle to flush out any remaining debris.
Regularly cleaning your washing machine filter helps maintain machine performance, prevents drainage issues, and keeps your clothes free of lint. It is recommended to clean the filter about once a month or as needed depending on usage.
