To put on a belt buckle, follow these general steps depending on your buckle type:
Standard Belt Buckle Attachment
- Remove any existing buckle if your belt has one, by opening snaps or unscrewing fasteners at the belt end.
- Slide the belt end through the buckle hinge or swivel -this is the metal loop on the back of the buckle. Make sure the belt width fits the buckle size.
- Secure the buckle to the belt :
- For snap fasteners, press the snaps firmly until they click.
- For screw fasteners, align the screw holes and tighten screws gently with a screwdriver.
- Put on the belt by threading it through your pants loops as usual.
- Fasten the belt by inserting the buckle prong into the appropriate hole on the belt strap for a snug fit.
- Adjust the buckle position so it sits centered and secure on your waist. Tuck any excess belt length into the belt loops or keeper
Shortcut Method (If Buckle Fits Over Existing Buckle)
- Put on your belt normally without the decorative buckle.
- Slide the ornament buckle over the existing buckle if it fits.
- Fasten the belt as usual and adjust the buckle position
Additional Tips
- Check that the buckle’s prong faces outward and aligns with the belt holes.
- If your belt uses a hook-and-loop or automatic buckle system, follow the specific securing method for that style.
- Ensure the buckle is firmly attached and does not shift when worn
This process works for most standard, western, snap, screw, and plate style belt buckles.
