how to clean dyson animal filter

To clean the filter of a Dyson Animal vacuum:

1. Remove the filter carefully (usually from the end or top of the canister).
2. Tap the filter lightly to remove loose dust and debris over a trash bin or outside.
3. Rinse the filter under warm or cold running water (check the specific model instructions). Use just water—no detergents or soaps.
4. Gently rub or scrub the mesh with fingers or a soft brush to dislodge dust.
5. Fill the filter with water, shake it, and repeat until water runs clear.
6. Shake out excess water and let the filter dry completely for at least 24 hours in a warm, ventilated place away from direct heat sources.
7. Ensure it is totally dry before reinstalling to avoid motor damage.

For Dyson Animal models specifically, there are usually two filters to clean following this process, and Dyson recommends cleaning filters every two months for optimal performance.